The barrel-making materials must meet the following requirements:
(1) The barrel-making needs to use high-quality low-carbon steel, the material must have good plasticity and deformation stability, and the low-carbon steel with a carbon content of not more than 0.05% to 0.15% has good plasticity. The greater the elongation δ value, the greater the plasticity. The better, the smaller the yield ratio σs/σb, the better the plasticity. For plates with a thickness of 0.8~2mm, the standard grain size should be grade 5~99.
(2) The material should have the ability to resist pressure instability and wrinkle. This ability is related to the modulus of elasticity (E), the yield ratio and the plate thickness directivity coefficient r. When σs/σb is small, the ultimate deformation degree is large. The greater the r value, the greater the degree of deformation.
(3) The surface of the steel plate should be standard and clean, free from scratches, pitting, scratches, pores and shrinkage, and the flatness of the surface should meet the standard, without warpage, unevenness, and rust spots. Thickness tolerance and overall dimension tolerance should comply with national standards. For details, please refer to industry standard YB/T 055. For example, for cold-rolled and zinc-locked thin steel plates for 200L steel drums, the allowable deviation of the chemical composition of the finished steel plates and steel strips should meet the requirements of GB/T 222-2006. The size measurement method of steel plate (strip) should meet the requirements of GB/T 708-2019. The re-inspection of steel plates shall be carried out in accordance with GB/T 247-2008.
Short comment: When making steel drums, you need to use good raw materials. At the same time, the drum closure of steel drums also needs to have good quality. The sealer provided by CX is made of high-quality steel and the surface is galvanized, which not only enhances the service life of the drum closure, but also prevents the sealer from rusting.
Specification For Cold Rolled Steel Plates For Steel DrumsJune 30, 2022European Steel Drum Manufacturers Association (SEFA) recommendationsThe proposal was developed by the European Steel Drum Manufacturers Association (SEFA) in collaboration with supplier members of the...view
How Do The Auditors Do Not Understand Pretend And Understand, But The Layman Pretends The Expert?July 1, 202201."Hope" sets the toneA. "hope" productProducts (including semi-finished products) are actually the most overlooked, but also the most critical place. The best production line is ...view
How to Select a Great Closure System for My Steel Drum?April 2, 2022How much attention you put on steel drum closure system? It is the “last close” of drum factory and the “first open” of drum user, as well as the only connection of inner content and outter enviro...view
International Steel Prices Generally RoseJuly 1, 2022China is purposefully inflating the price of global steel materials in order to curb the US's drive to invest in infrastructure.The next step will be to push up infrastructure related resources in...view
The Significance of Quality Water Drum Caps in StorageFebruary 5, 2024Water is an essential resource for our daily lives, and its importance cannot be overstated. From drinking to cooking and cleaning, water is crucial for our survival. However, ensuring the quality and...view
Talking About The Future Development Trend Of Transportation PackagingJuly 1, 2022Although, fast development of logistics industry in China, the total transportation rise year by year, but due to the packaging design technology in China starts late, not form a complete knowledge sy...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
