In order to do a good job of risk control in environmental protection renovation, the following control measures are suggested:
1. Comprehensive and accurate identification of various risks in the process of exhaust gas recovery and treatment, control measures ahead.
2. Strengthen the risk assessment during the transformation of exhaust gas recovery facilities, to ensure that the risk is controllable, and then through the formal design, and strengthen the transformation construction management.
3. Compile the pilot production plan of the recycling facility when it is put into use, organize the pilot production scientifically.
4. When different tail gas mixtures are collected in a centralized manner, risk analysis should be carried out on the interaction between various tail gas to clarify the dangerous characteristics of tail gas. Verify and test the composition, risk, explosion limit, flash point and ignition point of tail gas to fully grasp the safety risk of tail gas and avoid reaction.
5. In the closed workshop, the gas collection hood, gas phase hose and other facilities should be used to recover the unorganized gas emissions, while maintaining good ventilation to reduce the local accumulation of volatiles.
6. Scientific interlock protection shall be carried out between the ignition device of the RTO, the collecting fan and the mixed gas emergency exhaust device. In case of ignition failure and insufficient combustion concentration of the mixed gas, the fan and check valve shall be interlocked to be cut off while the explosive mixed gas in the system is drained.
7. To waste of gas pipe (tail) back to the (fire) facilities for inspection and optimization, especially for workshop, regional, pipeline and RTO junction between parts such as area, shall organize experts to set up the check, the security risks of fire, explosion and other safety devices are identified and reasoning, on the premise of ensuring security Settings prevent burning (fire) one-way check back, fire damper, etc.
8. Oil storage enterprises can adopt nitrogen sealing measures to avoid direct oil contact with air and reduce VOCs escaping.
Sources Said Russia's Proposed Export Tax Would Hurt The IndustryJuly 1, 2022Russia's decision to apply a 15%duty on all major ferrous and non-ferrous metals exports for six months will adversely impact the industry and force Russian steel products from the global market, ...view
Barrel Mouth Parts And Gasket Influence On Drum LeakageJuly 1, 2022The flange(1) Material cause. When producing flanges, due to multiple stamping and stretching, the strength of steel plates with high carbon content varies, hardness increases and cracks occur at the ...view
Cold Rolling: This Week The National Cold Rolling Spot Price Weak Shock, Poor Market Turnover.July 1, 2022Cold rolling: this week the national cold rolling spot price weak shock, poor market turnover.Fundamental point of view, from the fundamentals of cold rolling, supply recovery, weekly production of 82...view
What Is The Function Of Engine Oil?July 1, 2022The density of about 0.91×103 (kg/m3) can play a role in the engine lubrication and wear reduction, auxiliary cooling and cooling, sealing and leakage prevention, rust prevention and corrosion preven...view
Standard For Use Of Steel Barrel Closures: Myers Container CompanyJuly 1, 20221. Closed system componentsIn order to ensure compliance with the UN requirements for the transportation of dangerous goods, the filler must inspect and re-tighten all applicable caps as needed before...view
Iran: China is TrustworthyApril 10, 2023In 2015, the lifting of sanctions on Iran became a hot topic worldwide. Companies from all over the world have set their sights on the Iranian market and have begun actively entering it. Iran, a major...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
